Aquaflex KS-901F-KS-901F Polymer Waterproof Mortar
PRODUCT DESCRIPTION
KS-901F Polymer waterproof mortar is made of high polymer emulsion, a variety of inorganic materials and aggregates and additives.
WHERE TO USE
The integral waterproof and pressed anti permeability mortar of external wall
Waterproof and anti seepage treatment of sloping roof, toilet, bathroom, kitchen, basement and sink
The leakage and plaster treatment for aerated concrete, porous hollow brick masonry materials
Old and new building maintenance, or repair, and paste marble, ceramic tile, mosaic, artificial stone, asbestos, gypsum board, wood floor.
Single component dry powder products, can be used directly after mix with water, the construction is simple and convenient.
Good adaptability, can be used in damp base surface (plane or elevation).
Strong bonding ability, impermeability, water resistance and durability are good.
Durable for high / low temperature, acid and alkali resistant.
In the wet surface of the base construction, positive side and back surface can be the construction. Have a remarkable waterproof effect.
Recommend usage: Subject to usage of powder: water = 20: (4.0-5.0), The usage for 1.0mm thickness coating is about 1.5kgs/square meter.
Wall, ceiling: 2 to 3 coats, 1mm to 2mm thickness per coat, total thickness not exceed 5.0mm
Using for decoration tile laying: 1 coat, 2mm thickness on substrate, 1 coat, 2mm thickness on tile
Gross weight: 20kgs/set
|
No. |
Item |
Index |
||
|
1 |
Setting time |
Initial setting/min ≥ |
45 |
|
|
24 |
||||
|
Final setting/h ≤ |
||||
|
0.5 |
||||
|
2 |
Anti-permeability/MPa |
7d |
||
|
24.0 |
||||
|
3 |
Compressive strength/MPa ≥ |
|||
|
8.0 |
||||
|
4 |
Breaking strength/MPa ≥ |
|||
|
5 |
Adhesive strength/MPa ≥ |
7d ≥ |
1.0 |
|
|
1.2 |
||||
|
28d ≥ |
||||