Aquathene APF-600-APF-600 Wet/Pre-applied Modified Bitumen Waterproof Membrane
PRODUCT DESCRIPTION
APF-600 Wet-applied modified bitumen waterproof membrane's base material is petroleum bitumen, use special modifier to modify the self-adhesive bitumen, and use polyester fabric as the strengthening layer. The upper surface is the silicon coated isolation film, and the back surface is the silicon coated isolation film or PE film, it is a polyester modified bitumen waterproofing membrane which can be wet-applied construction.
APF-600 Pre-applied modified bitumen waterproof membrane's base material is petroleum bitumen, use SBS / SBR, tackifying resin as modifier to modify the self-adhesive bitumen, and use polyester fabric as the strengthening layer. The upper surface is the silicon coated isolation film, and the back surface is the silicon coated isolation film or PE film, it is a polyester modified bitumen waterproofing membrane which can be pre-applied construction.
WHERE TO USE
Wet-applied: Widely used in various types of the non-exposed roof, underground and indoor waterproofing projects, and excavation subway, tunnels, pools, canals and other waterproofing projects, especially for waterproofing projects which requires cold construction
Pre-applied: Used for underground construction and underground excavation subway or other underground projects' floor and side wall
Remarkable waterproof performance
Excellent heat resistance and low temperature flexibility
Outstanding puncture resistance
Strong adhesion, can targeted the leakage in localized area
Good stability and corrosion resistance, lasting effect
Packing: 1m x 10m (10m2/roll)
|
Item |
Index (PV) |
|||
|
Pre-applied membrane |
Wet-applied membrane |
|||
|
I |
II |
|||
|
Soluble matter content（g/m2） |
3.0mm |
-- |
2100 |
|
|
4.0mm |
||||
|
2900 |
2900 |
|||
|
800 |
400 |
600 |
||
|
Tensile properties |
Tension/(N/50mm) ≥ |
|||
|
40 |
30 |
40 |
||
|
Elongation at maximum tension /% ≥ |
||||
|
Nail shank tear strength/N≥ |
200 |
-- |
||
|
Tear strength N |
||||
|
|
180 |
300 |
||
|
-25 ℃No crack |
-15℃ No crack |
-25℃ No crack |
||
|
Low temperature flexibility/℃ |
||||
|
70℃2h no sliding / flowing /dripping |
||||
|
Heat resistance |
||||
|
Static load |
20kg no leakage |
-- |
||
|
Impact resistance |
Diameter (10 + 0.1) mm, no leakage. |
-- |
||