RubberBit KS-560 -Spray-applied quick-cured rubberized bitumen waterproof coating
PRODUCT DESCRIPTION
ubberbit KS-560 spray-applied quick-cured rubberized bitumen waterproof coating is environment friendly and multifunction. It is made up a combination of high-performance modified emulsified rubber bitumen and curing agent, using advanced technology of cooling spray to make films.
WHERE TO USE
- Industrial and civil building basement, roofing and other protective waterproof
- Chemical, electric power and other industrial protection
- Diversion project, drainage engineering and water conservancy facilities protection
- Underground space liner and so on
- Volatile matter barrier and defense engineering
Applications: Indonesia Fantasy Island Project
PRODUCT STRUCTURE
PRODUCT FEATURES
- Simple and convenient construction .using advanced technology of cooling spray, saving time and labor
- Quickly set all set within 3-5 seconds after spraying
- Jointless waterproof membrane. It is suitable for every abnormal and complicated structured surface
- Strong adhesion with basic level
- Environmentally friendly and nontoxic. Without any organic solvent and stimulation
- Excellent performance. Temperature resistance, aging resistance, impact resistance, tensile resistance and hydrostatic pressure resistance. Anti acid, alkali and salt. Excellent extension
- Good extension. Great film extensibility, over 1000% of the elongation rate, ability to adapt to structural of 90%, can stretch, good fatigue resistance of waterproof layer
- Good nail shank impermeability. The rubber in coating has a very good elasticity that can automatically form a protective effect on the pinhole
SPECIFICATION
PACKING SPECIFICATION:50kg/bucket, 200kg/bucket
RECOMMEND USAGE:
The usage for 1.0mm thickness coating is about 1.8-2.0 kg/square meter.
DATABASE
|
Item
|
Index
|
|||
|---|---|---|---|---|
|
I
|
II
|
III
|
||
|
Solids content%≥
|
≥55
|
|||
|
Heat resistance
|
(120±2) ℃, no flowing, sliding, dropping
|
|||
|
Impermeability
|
0.3Mpa, 30mins impermeability
|
|||
|
Gel time, s
|
≤10
|
|||
|
Adhesive strength / Mpa
|
Dry base
|
≥0.4
|
||
|
Wet base
|
||||
|
Hard drying time, h
|
≤24
|
|||
|
Anti perforation (300mm high drop hammer,500mm high water column
|
No leakage
|
|||
|
Water absorption(24h),%
|
≤2
|
|||
|
Flexibility at low temperature℃
|
-15℃,no crack
|
-20℃,no crack
|
-30℃,no crack
|
|
|
Elongation at break,%
|
≥1000
|
|||
|
Tensile strength/Mpa
|
≥0.5
|
≥0.7
|
≥1
|
|